产品应用与封装尺寸
图纸取自原厂规格书，点击可放大查看原始尺寸标注。
关键参数速览
- 正向电流 IF
- 28Ω I
- 隔离电压 VISO
- 500 V DC
- 工作温度 TA
- +185°F
产品特点 Features
- 1. Low cost type. • Modem
- .1 4 6 .3 9 4 .1 .4 73 2. High sensitivity, Low ON resistance • Telephone equipment
- 2.1 Can control a maximum 0.5A (AQY282S, • Security equipment
- AQW282S) load current with a 5mA input • Sensors current. • Amusement
- Low ON resistance of 2.5Ω (AQY282S,
- 4.4 AQW282S).
- 9.37 .173
- .369 2.1 Stable operation because there are no
- .083 metallic contact parts.
- 3. Various package design (DIP4,
- SOP4, DIP8, SOP8 packages are mm inch available)
- 4. Low-level off state leakage current
- The SSR has an off state leakage current of several milliamperes, where as the
- PhotoMOS relay has only 100pA even with the rated load voltage of 350V
- (AQY280S, AQW280S).
- SOP TYPE
绝对最大额定值 Absolute Maximum Ratings（TA = 25°C）
超过下表数值可能造成器件永久损坏，设计时请留余量。
| 项目 | 符号 | AQY282S | AQY280S | AQY284S | 备注 |
|---|---|---|---|---|---|
| LED forward current | I | 50 mA | |||
| Input | f = | 100 Hz, | |||
| Peak forward current | I | 1 A | |||
| FP | Duty | factor = 0.1% | |||
| Power dissipation | P | 75 mW | |||
| Load voltage (peak AC) | V | 60 V | 350 V | 400 V | |
| Continuous load current (peak | AC) I | 0.5 A | 0.12 A | 0.1 A | |
| Output | 100 | ms (1 shot), | |||
| Peak load current | I | 1.5 A | 0.3 A | 0.24 A | |
| peak | V = | DC | |||
| Power dissipation | P | 300 mW | |||
| Total power dissipation | P | 350 mW | |||
| I/O isolatiom voltage | V | 1,500 V AC | |||
| Operating temperature | T | –40°C to | +85°C –40°F to | +185°F | Non-condensing at low temperature |
| Storage temperature | T | –40°C to | +100°C –40°F to | +212°F | |
| LED forward current | I | 50 mA | |||
| Input | f = | 100 Hz, | |||
| Peak forward current | I | 1 A | |||
| FP | Duty | factor = 0.1% | |||
| Power dissipation | P | 75 mW | |||
| Load voltage (peak AC) | V | 60 V | 350 V | 400 V | |
| Output | 100 | ms (1 shot), | |||
| Peak load current | I | 1.05 A | 0.3 A | 0.24 A | |
| peak | V = | DC | |||
| Power dissipation | P | 600 mW | |||
| Total power dissipation | P | 650 mW | |||
| I/O isolatiom voltage | V | 1,500 V AC | |||
| Operating temperature | T | –40°C to | +85°C –40°F to | +185°F | Non-condensing at low temperature |
| Storage temperature | T | –40°C to | +100°C –40°F to | +212°F | AQ 28 S |
| Typical | 1.8 mA | ||||
| LED operate current | I | I | = Max. | ||
| Maximum | 3.0 mA | ||||
| Minimum | 0.2 mA | ||||
| Input LED turn off current | I | I | = Max. | ||
| Typical | 1.6 mA | ||||
| Typical | 1.14 | V (1.25 V at I = | 50mA) | ||
| LED dropout voltage | V Maximum | 1.5 V | I | = 5 mA | |
| Typical | 0.85Ω | 20Ω | 28Ω I | F = 5 mA | |
| On resistance | R | I | = Max. | ||
| Output | Maximum | 2.5Ω | 25Ω | 35Ω I | Within 1 s on time = 0 mA |
| Off state leakage current | Maximum I | 1µA | F | ||
| Typical | 0.9 ms | 0.3 | ms I | = 5 mA | |
| Turn on time* | T | F | |||
| Maximum on | 3 ms | I | L = Max. | ||
| Typical | 0.5 ms | I | = 5 mA | ||
| Transfer Turn off time* | Maximum T off | 2 ms | I | F L = Max. | |
| Typical | 0.8 pF | f | = 1 MHz | ||
| Maximum iso | 1.5 pF | V B = 0V | |||
| Initial I/O isolation resistance | Minimum R | 1,000 MΩ | 500 V DC | ||
| (1) AQY282S | (2) AQY280S, AQY284S | (3) | AQW282S | ||
| 1000 | 200 | 800 | |||
| Am | Am | Am | |||
| 750 | 150 | 600 | |||
| ,tnerruc | ,tnerruc | ,tnerruc | |||
| daoL 500 | daoL 100 | daoL | 400 | ||
| 250 | 50 | 200 | |||
| 0 | 0 | 0 | |||
| –40 –20 0 20 40 60 8085100 | –40 –20 0 20 | 40 60 8085100 | –40 –20 0 20 | 40 60 8085100 | |
| Ambient temperature, °C | Ambient | temperature, °C | Ambient | temperature, °C |
数据来源：原厂规格书
电气特性 Electrical Characteristics（TA = 25°C）
| 项目 | 符号 | AQY282S | AQY280S | AQY284S | 条件 |
|---|---|---|---|---|---|
| Typical | 1.8 mA | ||||
| LED operate current | I | I | = Max. | ||
| Maximum | 3.0 mA | ||||
| Minimum | 0.2 mA | ||||
| Input LED turn off current | I | I | = Max. | ||
| Typical | 1.6 mA | ||||
| Typical | 1.14 | V (1.25 V at I = | 50mA) | ||
| LED dropout voltage | V Maximum | 1.5 V | I | = 5 mA | |
| Typical | 0.85Ω | 20Ω | 28Ω I | F = 5 mA | |
| On resistance | R | I | = Max. | ||
| Output | Maximum | 2.5Ω | 25Ω | 35Ω I | Within 1 s on time = 0 mA |
| Off state leakage current | Maximum I | 1µA | F | ||
| Typical | 0.9 ms | 0.3 | ms I | = 5 mA | |
| Turn on time* | T | F | |||
| Maximum on | 3 ms | I | L = Max. | ||
| Typical | 0.5 ms | I | = 5 mA | ||
| Transfer Turn off time* | Maximum T off | 2 ms | I | F L = Max. | |
| Typical | 0.8 pF | f | = 1 MHz | ||
| Maximum iso | 1.5 pF | V B = 0V | |||
| Initial I/O isolation resistance | Minimum R | 1,000 MΩ | 500 V DC AQ 28 S | ||
| Typical | 1.8 mA | ||||
| LED operate current | I | I | = Max. | ||
| Maximum | 3.0 mA | ||||
| Minimum | 0.2 mA | ||||
| Input LED turn off current | I | I | = Max. | ||
| Typical | 1.6 mA | ||||
| Typical | 1.14 | V (1.25 V at I = | 50mA) | ||
| LED dropout voltage | V Maximum | 1.5 V | I | = 5 mA | |
| Typical | 0.85Ω | 20Ω | 28Ω I | F = 5 mA | |
| On resistance | R | I | = Max. | ||
| Output | Maximum | 2.5Ω | 25Ω | 35Ω I | Within 1 s on time = 0 mA |
| Off state leakage current | Maximum I | 1µA | F | ||
| Typical | 0.9 ms | 0.3 | ms I | = 5 mA | |
| Turn on time* | T | F | |||
| Maximum on | 3 ms | I | L = Max. | ||
| Typical | 0.5 ms | I | = 5 mA | ||
| Transfer Turn off time* | Maximum T off | 2 ms | I | F L = Max. | |
| Typical | 0.8 pF | f | = 1 MHz | ||
| Maximum iso | 1.5 pF | V B = 0V | |||
| Initial I/O isolation resistance | Minimum R | 1,000 MΩ | 500 V DC | ||
| (1) AQY282S | (2) AQY280S, AQY284S | (3) | AQW282S | ||
| 1000 | 200 | 800 | |||
| Am | Am | Am | |||
| 750 | 150 | 600 | |||
| ,tnerruc | ,tnerruc | ,tnerruc | |||
| daoL 500 | daoL 100 | daoL | 400 | ||
| 250 | 50 | 200 | |||
| 0 | 0 | 0 | |||
| –40 –20 0 20 40 60 8085100 | –40 –20 0 20 | 40 60 8085100 | –40 –20 0 20 | 40 60 8085100 | |
| Ambient temperature, °C | Ambient | temperature, °C | Ambient | temperature, °C |
特性曲线（Typical Performance Curves）
