产品实拍图
本页为博科信现货实拍（器件丝印 见规格书）。图片已加防盗水印，需要最新批次照片或未加水印原图请联系销售；点击图片可放大。
产品应用与封装尺寸
图纸取自原厂规格书，点击可放大查看原始尺寸标注。
关键参数速览
- 正向电流 IF
- 1.25 V (1.16 V
- 隔离电压 VISO
- 500 V
产品特点 Features
- .138 1. Slim SIL4-pin package • Traffic signals
- .827 (W) 3.5 × (D) 21.0 × (H) 12.5 mm • Measuring instruments
- .492 (W) .138 × (D) .827 × (H) .492 inch • Industrial machines
- The compact size of the 4-pin SIL package allows high density mounting.
- 2. Extremely low on-resistance
- 3. Control low-level signal mm inch standoff closed-circuit offset voltage to enable control of low-level analog signals without distortion.
- 4. Low-level off state leakage current of max. 10 µA
- 1 2 3 4
- + – + 5. High I/O isolation voltage of 2,500 V
- DC type 6. Eliminates the need for a counter
- Power 1 Form A (AQZ10 , 20 )
- RATING
- 1. DC type
- 2. AC/DC type
绝对最大额定值 Absolute Maximum Ratings（TA = 25°C）
超过下表数值可能造成器件永久损坏，设计时请留余量。
| 项目 | 符号 | AQZ102 | AQZ105 | AQZ107 | AQZ104 | 备注 |
|---|---|---|---|---|---|---|
| LED forward current | IF | 50 | mA | |||
| Peak forward current | IFP | 1 | A | f = 100 | Hz, Duty factor = 0.1% | |
| Power dissipation | Pin | 75 | mW | |||
| Load voltage (DC) | VL | 60 V | 100 V | 200 V | 400 V | |
| Continuous load current (DC) | IL | 4.0 A | 2.6 A | 1.3 A | 0.7 A | |
| Peak load current | Ipeak | 9.0 A | 6.0 A | 3.0 A | 1.5 A 100 ms | (1 shot), VL = DC |
| Power dissipation | Pout | 1.35 | W | |||
| Total power dissipation | PT | 1.35 | W | |||
| LED forward current | IF | 50 | mA | |||
| Peak forward current | IFP | 1 | A | f = 100 | Hz, Duty factor = 0.1% | |
| Power dissipation | Pin | 75 | mW | |||
| Load voltage (Peak AC) | VL | 60 V | 100 V | 200 V | 400 V | |
| Continuous load current | IL | 3.0 A | 2.0 A | 1.0 A | 0.5 A Peak | AC, DC |
| Peak load current | Ipeak | 9.0 A | 6.0 A | 3.0 A | 1.5 A 100 ms | (1 shot), VL = DC |
| Power dissipation | Pout | 1.6 | W | |||
| Total power dissipation | PT | 1.6 | W |
数据来源：原厂规格书
安全与绝缘额定值（DIN EN/IEC 60747−5−5）
| 项目 | 符号 | AQZ102 | AQZ105 | AQZ107 | AQZ104 | 备注 |
|---|---|---|---|---|---|---|
| limits Storage | Tstg | –40°C | to +100°C | –40°F to | +212°F | |
| limits Storage | Tstg | –40°C | to +100°C | –40°F to | +212°F |
电气特性 Electrical Characteristics（TA = 25°C）
| 项目 | 符号 | AQZ102 | AQZ105 | AQZ107 | AQZ104 | 条件 |
|---|---|---|---|---|---|---|
| Ty p ic al | 1 . 0 | m A | I L= 1 0 0 | mA | ||
| M a x im um | 3 . 0 | m A | V L= 1 0 | V | ||
| M i n i m u m | 0 . 4 | m A | I L= 1 0 0 | mA | ||
| Ty p i c a l | 0 . 9 | m A | V L= 1 0 | V | ||
| Typical | 1.25 V (1.16 V | at IF = 10 mA) | ||||
| LED dropout voltage | VF | IF = 50 | mA | |||
| Maximum | 1.5 | V | ||||
| Typical | 0.05 Ω | 0.081 Ω | 0.34 Ω | 1.06 Ω IF = 10 | mA | |
| On resistance | Ron | IL =Max. | ||||
| Output | Maximum | 0.09 Ω | 0.17 Ω | 0.55 Ω | 1.6 Ω Within | 1 s on time |
| Off state leakage current | Maximum ILeak | 10 | µA | I F = 0 | m A | |
| Typical | 1.66 ms | 1.89 ms | 0.83 ms | 1.01 ms IF = 10 IL = 100 | mA mA | |
| Maximum | 5.0 | ms | VL = 10 | V | ||
| Typical | 3.79 ms | 4.50 ms | 1.75 ms | 2.34 ms IF = 5 IL = 100 | mA mA | |
| Maximum | 10.0 | ms | VL = 10 | V | ||
| Typical | 0.15 ms | 0.19 ms | 0.08 ms | 0.08 ms IF = 5 | mA or 10 mA | |
| Transfer Turn off time* | Toff | IL = 100 | mA | |||
| characteristics | Maximum | 3.0 | ms | VL = 10 | V | |
| Typical | 0.8 | pF | f = 1 | MHz | ||
| Maximum | 1.5 | pF | VB = 0 | V | ||
| Initial I/O isolation resistance | Minimum Riso | 1,000 | MΩ | 500 V IF = 10 | DC mA | |
| Maximum operating speed | Maximum — | 0.5 | times/s | Duty | factor = 50% | |
| IL ×VL= | 200 (VA) | |||||
| Vibration resistance | Minimum — | 10 to 55 | Hz at double | amplitude | of 3 mm 2 hours | for 3 axes |
| Shock resistance | Minimum — | 4,900 m/s2 | {500 G} 1 ms | 3 times | for 3 axes | |
| Ty p ic al | 1 . 0 | m A | I L= 1 0 0 | mA | ||
| M a x im um | 3 . 0 | m A | V L= 1 0 | V | ||
| M i n i m u m | 0 . 4 | m A | I L= 1 0 0 | mA | ||
| Ty p i c a l | 0 . 9 | m A | V L= 1 0 | V | ||
| Typical | 1.25 V (1.16 V | at IF = 10 mA) | ||||
| LED dropout voltage | VF | IF = 50 | mA | |||
| Maximum | 1.5 | V | ||||
| Typical | 0.11 Ω | 0.23 Ω | 0.7 Ω | 2.1 Ω IF = 10 | mA | |
| On resistance | Ron | IL =Max. | ||||
| Output | Maximum | 0.18 Ω | 0.34 Ω | 1.1 Ω | 3.2 Ω Within | 1 s on time |
| Off state leakage current | Maximum ILeak | 10 | µA | I F = 0 | m A | |
| Typical | 2.46 ms | 2.40 ms | 1.12 ms | 1.65 ms IF = 10 IL = 100 | mA mA | |
| Maximum | 5.0 | ms | VL = 10 | V | ||
| Typical | 5.64 ms | 5.65 ms | 2.57 ms | 3.88 ms IF = 5 IL = 100 | mA mA | |
| Maximum | 10.0 | ms | VL = 10 | V | ||
| Typical | 0.22 ms | 0.21 ms | 0.10 ms | 0.08 ms IF = 5 | mA or 10 mA | |
| Transfer Turn off time* | Toff | IL = 100 | mA | |||
| characteristics | Maximum | 3.0 | ms | VL = 10 | V | |
| Typical | 0.8 | pF | f = 1 | MHz | ||
| Maximum | 1.5 | pF | VB = 0 | V | ||
| Initial I/O isolation resistance | Minimum Riso | 1,000 | MΩ | 500 V IF = 10 | DC mA | |
| Maximum operating speed | Maximum — | 0.5 | cps | Duty | factor = 50% | |
| Vibration resistance | Minimum — | 10 to 55 | Hz at double | amplitude | of 3 mm 2 hours | for 3 axes |
| Shock resistance | Minimum — | 4,900 m/s2 | {500 G}1 ms | 3 times | for 3 axes |
特性曲线（Typical Performance Curves）
