引脚定义与内部结构
| 引脚 | 符号 | 名称 |
|---|---|---|
| 1 | Anode | |
| 2 | Cathode | |
| 3 | Emitter | |
| 4 | Collector | |
| 6 | Mechanical Parameters |
数据来源：原厂规格书引脚图
关键参数速览
- 正向电压 VF
- 1.4
- 电流传输比 CTR
- 6000
- 集电极-发射极电压 VCEO
- 300
产品特点 Features
- (1) Collector-emitter voltage: 300 V (min)
- (2) Current transfer ratio: 1000 % (min) (@I = 1 mA, V = 1 V)
- TLP627M,TLP627MF
- 4. Packaging (Note)
- TLP627M TLP627M(LF1,TP1) TLP627M(LF5,TP5)
- 11-5B201S 11-5B205S
- 11-5B2S
- TLP627MF TLP627MF(LF4,TP4)
- 11-5B204S
- 11-5B202S
- 7. Absolute Maximum Ratings (Note) (Unless otherwise specified, T = 25 ) aaaa
- Characteristics Symbol Note Rating Unit
- LED Input forward current I 50 mA
- Input forward current derating (T ≥ 90 ) ∆I /∆T -1.42 mA/ a F a
- Input forward current (pulsed) I (Note 1) 1 A
- Input power dissipation P 100 mW
安全与绝缘额定值（DIN EN/IEC 60747−5−5）
| 特性 | 符号 | 备注 | 额定值 | 单位 |
|---|---|---|---|---|
| TLP627M,TLP627MF | ||||
| LED Input forward current | I | 50 | mA | |
| Input forward current derating (T ≥ | 90 ) ∆I /∆T | -1.42 | mA/ | |
| Input forward current (pulsed) | I | (Note 1) | 1 | A |
| Input power dissipation | P | 100 | mW | |
| Input power dissipation derating (T ≥ | 90 ) ∆P /∆T | -2.85 | mW/ | |
| Junction temperature | T | 125 | | |
| Detector Collector-emitter voltage | V | 300 | V | |
| Emitter-collector voltage | V | 0.3 | V | |
| Collector current | I | 150 | mA | |
| Collector power dissipation | P | 150 | mW | |
| Collector power dissipation derating (T ≥ | 25 ) ∆P /∆T | -1.5 | mW/ | |
| Junction temperature | T | 125 | | |
| Common Operating temperature | T | -55 to 110 | | |
| Storage temperature | T | -55 to 125 | | |
| Lead soldering temperature (10 | s) T | 260 | | |
| Total power dissipation | P | 250 | mW | |
| Total power dissipation derating (T ≥ | 25 ) ∆P /∆T | -2.5 | mW/ | |
| Isolation voltage (AC, 60 s, | R.H. ≤ 60 %) BV | (Note 2) | 5000 | Vrms |
电气特性 Electrical Characteristics（TA = 25°C）
| 特性 | 符号 | 备注 | 测试条件 | 最小 | 典型 | 最大 | 单位 |
|---|---|---|---|---|---|---|---|
| LED Input forward voltage | V | I | = 10 mA | 1.1 | 1.25 | 1.4 | V |
| Input capacitance | C | V | = 0 V, f = 1 MHz | | 30 | | pF |
| Detector Collector-emitter breakdown | voltage V | I | = 0.1 mA | 300 | | | V |
| Emitter-collector breakdown | voltage V | I | = 0.1 mA | 0.3 | | | V |
| Dark Current | I | V | = 200 V | | 0.002 | 0.2 | µA |
| V | = 200 V, T = 85 | | | 20 | |||
| Collector-emitter capacitance | C | V | = 0 V, f = 1 MHz | | 900 | | pF |
| Current transfer ratio I | /I I | = 1 mA, V | = 1 V | 1000 | 6000 | | % |
| Saturated current transfer ratio I /I | I | = 10 mA, V | = 1 V | 500 | | | % |
| Collector-emitter saturation voltage V | I | = 10 mA, I | = 1 mA | | | 1.0 | V |
| I | = 100 mA, | I = 10 mA | 0.3 | | 1.2 | ||
| OFF-state collector current I | V | = 0.7 V, V | = 200 V | | | 20 | µA |
| TLP627M,TLP627MF |