产品应用与封装尺寸
图纸取自原厂规格书，点击可放大查看原始尺寸标注。
关键参数速览
- 正向电流 IF
- 1.25 V (1.14 V
- 工作温度 TA
- 1
产品特点 Features
- .142 mm inch
- RoHS compliant
- TYPES
- Output rating*
- I/O isolation
- Load Load voltage current
- Standard 350 V 130 mA
- AC/DC 1,500 V AC 400 V 120 mA dual use Reinforced 350 V 130 mA
- 5,000 V 400 V 120 mA
- *Indicate the peak AC and DC values.
- circuit offset voltage to enable control of low-level analog signals without distortion.
- 3. Stable on-resistance
- 4. Low-level off state leakage current of max. 1 µA
- Part No.
- Through hole Packing quantity
- Surface-mount terminal terminal
绝对最大额定值 Absolute Maximum Ratings（TA = 25°C）
超过下表数值可能造成器件永久损坏，设计时请留余量。
| 项目 | 符号 | connec- | AQV210E(A) | AQV214E(A) | AQV210EH(A) | AQV214EH(A) | 条件 |
|---|---|---|---|---|---|---|---|
| GU-E 1 | Form A | (AQV21 | E, | AQV21 EH) |
数据来源：原厂规格书
安全与绝缘额定值（DIN EN/IEC 60747−5−5）
| 项目 | 符号 | connec- | AQV210E(A) | AQV214E(A) | AQV210EH(A) | AQV214EH(A) | 条件 |
|---|---|---|---|---|---|---|---|
| GU-E 1 | Form A | (AQV21 | E, | AQV21 EH) |
电气特性 Electrical Characteristics（TA = 25°C）
| 项目 | 符号 | connec- | AQV210E(A) | AQV214E(A) | AQV210EH(A) | AQV214EH(A) | 条件 |
|---|---|---|---|---|---|---|---|
| Typical | 1.1 | mA | 1.6 | mA | |||
| LED operate current | IFon | — | IL = Max. | ||||
| Maximum | 3 | mA | |||||
| Minimum | 0.3 | mA | 0.4 | mA | |||
| Input LED turn off current | IFoff | — | IL = Max. | ||||
| Typical | 1.0 | mA | 1.5 | mA | |||
| Typical | 1.25 V (1.14 V | at IF = 5 mA) | |||||
| LED dropout voltage | VF | — | IF = 50 mA | ||||
| Maximum | 1.5 | V | |||||
| Typical | 23 Ω | 30 Ω | 23 Ω | 30 Ω | IF = 5 mA | ||
| Ron | A | IL = Max. | |||||
| Maximum | 35 Ω | 50 Ω | 35 Ω | 50 Ω | Within 1 s on time | ||
| Typical | 11.5 Ω | 22.5 Ω | 11.5 Ω | 22.5 Ω | IF = 5 mA | ||
| On resistance | Ron | B | IL = Max. | ||||
| Output | Maximum | 17.5 Ω | 25 Ω | 17.5 Ω | 25 Ω | Within 1 s on time | |
| Typical | 6.0 Ω | 11.3 Ω | 6.0 Ω | 11.3 Ω | IF = 5 mA | ||
| Ron | C | IL = Max. | |||||
| Maximum | 8.8 Ω | 12.5 Ω | 8.8 Ω | 12.5 Ω | Within 1 s on time | ||
| O ff s t a te leakage | Maximum ILeak | — | 1 | µA | I F = 0 m A | ||
| Turn on time* | Ty p ic al Ton | — | 0.5 | ms | 0.7 | ms | I F = 0 m A ➝ 5 mA** |
| M a x im um | 2.0 | ms | lL = M a x . | ||||
| Ty p ic al | 0 .0 5 | m s | IF = 0 m A ➝ 5 mA | ||||
| Transfer | M a x im um | 1 .0 | m s | I L = M a x . | |||
| Typical | 0.8 | pF | f = 1 MHz | ||||
| Maximum | 1.5 | pF | VB = 0 V | ||||
| Minimum Riso | — | 1,000 | MΩ | 500 V DC |
特性曲线（Typical Performance Curves）
