产品应用与封装尺寸
图纸取自原厂规格书，点击可放大查看原始尺寸标注。
引脚定义与内部结构
| 引脚 | 符号 | 名称 |
|---|---|---|
| 1 | NC | |
| 3 | A | |
| 4 | NC | |
| 5 | V | |
| 6 | V | |
| 7 | V | |
| 8 | CASE | |
| 9 | V | |
| 10 | V |
数据来源：原厂规格书引脚图
关键参数速览
- 电源电压 VCC
- −0.5 to 35
- 工作温度 TA
- −40 to +100
产品特点 Features
- High Noise Immunity Characterized by 50 kV/ s (Typ.) Common
- Mode Rejection @ V = 2,000 V
- CM 3182
- Guaranteed Operating Temperature Range of −40 ° C to +100 ° C VXXYYB
- 3 A Peak Output Current
- 3182 = Device Number
- Fast Switching Speed V = VDE Mark (Note: Only appears on parts
- ♦ 210 ns Max. Propagation Delay ordered with DIN EN/IEC 60747−5−2 option − See ordering table)
- ♦ 65 ns Max. Pulse Width Distortion
- XX = Two Digit Year Code, e.g., “11”
- Fast Output Rise/Fall Time
- YY = Digit Work Week Ranging from “01” to “53”
- Offers Lower Dynamic Power Dissipation B = Assembly Package Code
- FOD3182
绝对最大额定值 Absolute Maximum Ratings（TA = 25°C）
超过下表数值可能造成器件永久损坏，设计时请留余量。
| 符号 | 参数 | 值 | 单位 |
|---|---|---|---|
| T Storage Temperature | −40 to +125 | °C | |
| T Operating Temperature | −40 to +100 | °C | |
| T Junction Temperature | −40 to +125 | °C | |
| I Average Input | Current (Note 1) | 25 | mA |
| I LED Current Minimum | Rate of Rise/Fall | 250 | ns |
| I “High” Peak Output | Current (Note 2) | 3 | A |
| I “Low” Peak Output | Current (Note 2) | 3 | A |
| V – V Supply Voltage | −0.5 to 35 | V | |
| V Output Voltage | 0 to V | V | |
| P Output Power | Dissipation (Note 3) | 250 | mW |
| P Total Power Dissipation | (Note 4) | 295 | mW |
数据来源：原厂规格书
安全与绝缘额定值（DIN EN/IEC 60747−5−5）
| 符号 | 参数 |
|---|---|
| NC 4 | 5 V |
| only within the safety limit | data. Compliance with the safety ratings shall |
| Installation | Classifications per DIN VDE 0110/1.89 Table 1 |
| For Rated | Mains Voltage < 150 Vrms |
| For Rated | Mains Voltage < 300 Vrms |
| For Rated | Mains Voltage < 450 Vrms |
| For Rated | Mains Voltage < 600 Vrms |
| For Rated | Mains Voltage < 1000 Vrms (Option T, TS) |
| Climatic | Classification |
| Pollution Degree | (DIN VDE 0110/1.89) |
| CTI Comparative | Tracking Index |
| V Input to Output | Test Voltage, Method b, |
| V x 1.875 | = V , 100% Production Test with tm = 1 |
| Partial Discharge | < 5 pC |
| Input to Output | Test Voltage, Method a, |
| V x 1.5 = | V , Type and Sample Test with tm = 60 |
| Partial Discharge | < 5 pC |
| − 40/100/21 − − 2 − 175 − − 2651 − − 2121 − − | |
| V Highest Allowable | Over Voltage |
| External | Clearance |
| External | Clearance (for Option T or TS − 0.4” Lead 6000 − − V 8 − − mm |
特性曲线（Typical Performance Curves）
