产品实拍图
本页为博科信现货实拍（器件丝印 见规格书）。图片已加防盗水印，需要最新批次照片或未加水印原图请联系销售；点击图片可放大。
产品应用与封装尺寸
图纸取自原厂规格书，点击可放大查看原始尺寸标注。
关键参数速览
- 正向电压 VF
- 25
- 电流传输比 CTR
- 5
- 电源电压 VCC
- -0.5 V to 30 V
- 工作温度 TA
- to +100°C
产品特点 Features
- These small outline high CMR, high speed, diode-transis- tor optocouplers are single channel devices in a five lead
- kΩµ Surface mountable
- Schematic Land Pattern Recommendation
- V 4.4
- (0.17)
- ANODE
- 1 1.3
- (0.05)
- V 2.5
- O 5 (0.10)
- CATHODE
- SHIELD
- (0.080) 0.64
- (0.025)
- (0.325)
- Dimensions in millimeters and (inches)
绝对最大额定值 Absolute Maximum Ratings（TA = 25°C）
超过下表数值可能造成器件永久损坏，设计时请留余量。
| 参数 | 符号 | 值 | 单位 | 条件 |
|---|---|---|---|---|
| (No Derating Required up | to 85°C) | |||
| Average Input Current - I | ................................................................................25 | mA[1] | ||
| Peak Input Current - I | ........................................................................................50 | mA[2] | ||
| (50% duty | cycle, 1 ms | pulse width) | ||
| Peak Transient Input Current | - I ............................................................................ | 1.0 A | ||
| ( 1 | μs pulse | width, 300 pps) | ||
| Input Power Dissipation | .....................................................................................45 | mW[3] | ||
| Average Output Current - | I (Pin 5) | .......................................................................8 | mA | |
| Peak Output Current | ................................................................................................16 | mA | ||
| Output Power Dissipation | .............................................................................. | 100 mW[4] |
数据来源：原厂规格书
安全与绝缘额定值（DIN EN/IEC 60747−5−5）
| 参数 | 符号 | 值 | 单位 | 条件 |
|---|---|---|---|---|
| The HCPL-M452/M453 are | approved by the following | organizations: | ||
| Approved under UL | 1577, component recognition | Approved under | CSA Component Acceptance Notice #5. | |
| program up to V = 3750 | V expected prior to | product | ||
| Min External Air Gap (Clearance) | L(IO1) | ≥ 5 | mm | Measured from input terminals to output |
| Min. Internal Plastic Gap | (Clearance) | 0.08 | mm | Through insulation distance conductor to |
| Tracking Resistance | CTI | 175 | V | DIN IEC 112/VDE 0303 Part 1 |
| Isolation Group (per DIN VDE | 0109) | IIIa | Material Group DIN VDE 0109 |
电气特性 Electrical Characteristics（TA = 25°C）
| 参数 | 符号 | 最小 | Typ.* | 最大 | 单位 | 测试条件 | 图号 | 备注 |
|---|---|---|---|---|---|---|---|---|
| Over recommended | temperature | (T | = 0°C to | 70°C) | unless | otherwise specified. (See note | 11.) | |
| Current Transfer | CTR | 20 | 24 | 50 | % | T = 25°C V = 0.4 V A O | V = 4.5 V 1, 2, 4 CC | 5 |
| Ratio | I = 16 mA | |||||||
| 15 | 25 | V = 0.5 V | F | |||||
| Logic Low Output | V OL | 0.1 | 0.4 | V | T = 25°C I = 3.0 mA A O | |||
| Logic High Output | I | 0.003 | 0.5 | A | T = 25°C V = V = | I = 0 mA 7 | ||
| Current | OH | A O CC 5.5 V | F | |||||
| 0.01 | 1 | T = 25°C V = V = | ||||||
| Logic Low Supply | I CCL | 50 | 200 | I = 16 mA, V = Open, V F O CC | = 15 V | 11 | ||
| Logic High Supply | I CCH | 0.02 | 1 | T = 25°C I = 0 mA, V A F O | = Open, | 11 | ||
| Current | 2 | V = 15.0 V CC | ||||||
| Input Forward | V F | 1.5 | 1.7 | V | T = 25°C I = 16 mA A F | 3 | ||
| Temperature | V / | -1.6 | mV/°C | I = 16 mA | ||||
| Input Capacitance | C | 60 | pF | f = 1 MHz, V = 0 | ||||
| Input-Output | V | 3750 | V | RH ≤ 50%, t = 1 min., T = | 25°C | 6, 7 | ||
| ISO | RMS | A |