关键参数速览
- 正向电压 VF
- 1.3
- 正向电流 IF
- 600
- 隔离电压 VISO
- 1014
- 工作温度 TA
- 500
绝对最大额定值 Absolute Maximum Ratings（TA = 25°C）
超过下表数值可能造成器件永久损坏，设计时请留余量。
| Characteristic | 符号 | 额定值 | 单位 |
|---|---|---|---|
| Forward current | I | 50 | mA |
| Forward current derating (Ta ≥ 53°C) | ∆I / °C | kΩ0.7 | mA / °C |
| Peak forward current (100µs pulse, 100pps) | I | 1 | A |
| Junction temperature | T | 125 | °C |
| OffkΩstate output terminal voltage Ta = 25°C | V | 600 70 | V |
| OnkΩstate RMS current Ta = 70°C | I | 40 | mA |
| OnkΩstate current derating (Ta ≥ 25°C) | ∆I / °C | kΩ0.67 | mA / °C |
| Peak onkΩstate current (100µs pulse, 120pps) | I | 2 | A |
| I | 1.2 | A | |
| (PW = 10ms, DC = 10%) | TSM | ||
| Junction temperature | T | 115 | °C |
| Storage temperature range | T | kΩ55~125 | °C |
| Operating temperature range | T | kΩ40~100 | °C |
| Lead soldering temperature (10 s) | T | 260 | °C |
数据来源：原厂规格书
安全与绝缘额定值（DIN EN/IEC 60747−5−5）
| Characteristic | 符号 | 额定值 | 单位 |
|---|---|---|---|
| TLP161J |
电气特性 Electrical Characteristics（TA = 25°C）
| Characteristic | 符号 | 测试条件 | 最小 | 典型 | 最大 | 单位 |
|---|---|---|---|---|---|---|
| Forward voltage | V I | = 10mA | 1.0 | 1.15 | 1.3 | V |
| Capacitance | C V | = 0, f = 1MH | ― | 30 | ― | pF |
| Peak offkΩstate current | I V | = 600V | ― | 10 | 1000 | nA |
| Peak onkΩstate voltage | V I | = 70mA | ― | 1.7 | 2.8 | V |
| Holding current | I | ― | ― | 0.6 | ― | mA |
| dv / dt V | = 240Vrms, Ta = 85°C (Fig.1) | 200 | 500 | ― | V/µs | |
| dv / dt(c) V | = 60Vrms, I = 15mA (Fig.1) | ― | 0.2 | ― | V/µs | |
| Trigger LED current | I V | = 6V | ― | 5 | 10 | mA |
| Inhibit voltage | V I | = Rated I | ― | ― | 50 | V |
| Leakage in inhibited state | I F | FT | ― | 200 | 600 | µA |
| Capacitance (input to output) | C V | = 0, f = 1MH | ― | 0.8 | ― | pF |
| Isolation resistance | R V | = 500V, R.H. ≤ 60% | 1×1012 | 1014 | ― | Ω |
| AC, | 1 minute | 2500 | ― | ― | ||
| Isolation voltage | BV S AC, | 1 second, in oil | ― | 5000 | ― | |
| AC, | 1 minute, in oil | ― | 5000 | ― | Vdc |