引脚定义与内部结构
| 引脚 | 符号 | 名称 |
|---|---|---|
| 1 | Anode | |
| 3 | Cathode | |
| 4 | GND | |
| 5 | V (Output) | |
| 6 | Principle of Operation |
数据来源：原厂规格书引脚图
关键参数速览
- 正向电压 VF
- 1.85
- 正向电流 IF
- 25
- 隔离电压 VISO
- 3750
- 电源电压 VCC
- 6
- 工作温度 TA
- -40 to 125
产品特点 Features
- (1) Inverter logic type (Totem pole output)
- (2) Package: SO6
- (3) Operating temperature: -40 to 125
- (4) Supply voltage: 2.7 to 5.5 V
- (5) Data transfer rate: 20 MBd (typ.) (NRZ)
- (6) Threshold input current: 3.5 mA (max)
- (7) Supply current: 3 mA (max)
- (8) Common-mode transient immunity: ±20 kV/µs (min)
- TLP2366
绝对最大额定值 Absolute Maximum Ratings（TA = 25°C）
超过下表数值可能造成器件永久损坏，设计时请留余量。
| 特性 | 符号 | 备注 | 额定值 | 单位 |
|---|---|---|---|---|
| LED Input forward current | I | 25 | mA | |
| Input forward current derating (T ≥ | 110 ) ∆I /∆T | -0.67 | mA/ | |
| Input forward current (pulsed) | I | (Note 1) | 40 | mA |
| Input forward current derating (T ≥ a | 110 ) ∆I /∆T FP a | -1.0 | mA/ | |
| Input power dissipation | P | 40 | mW | |
| Input power dissipation (T ≥ | 110 ) ∆P /∆T | -1.0 | mW/ | |
| Detector Output current | I | 10 | mA | |
| Output voltage | V | 6 | V | |
| Supply voltage | V | 6 | ||
| Output power dissipation | P | 60 | mW | |
| Output power dissipation (T ≥ | 110 ) ∆P /∆T | -1.5 | mW/ | |
| Common Operating temperature | T | -40 to 125 | | |
| Storage temperature | T | -55 to 125 | ||
| Lead soldering temperature (10 | s) T | 260 | ||
| Isolation voltage AC, 60 s, | R.H. ≤ 60 % BV | (Note 2) | 3750 | Vrms |
数据来源：原厂规格书
安全与绝缘额定值（DIN EN/IEC 60747−5−5）
| 特性 | 符号 | 备注 | 额定值 | 单位 |
|---|---|---|---|---|
| TLP2366 |
电气特性 Electrical Characteristics（TA = 25°C）
| 特性 | 符号 | 测试条件 | 最小 | 典型 | 最大 | 单位 |
|---|---|---|---|---|---|---|
| Input forward voltage | V | I = 10 mA, T = 25 | 1.45 | 1.61 | 1.85 | V |
| Input forward voltage temperature | ∆V /∆T | I = 10 mA | | -1.6 | | mV/ |
| Input capacitance | C | V = 0 V, f = 1 MHz, T = 25 | | 60 | | pF |
| Low-level output voltage | V Fig. | I = 14 mA, I = 4 mA | | | 0.4 | V |
| High-level output voltage | V Fig. | V = 1.05 V, I = -4 mA, | 2.3 | | | |
| V = 1.05 V, I = -4 mA, | 4 | | | |||
| Low-level supply current | I Fig. | I = 14 mA | | 1.6 | 3 | mA |
| High-level supply current | I Fig. | I = 0 mA | | 1.5 | 3 | |
| Threshold input current (H/L) | I | I = 1.6 mA, V < 0.4 V | | 0.9 | 3.5 |