关键参数速览
- 正向电压 VF
- 1.85
- 电流传输比 CTR
- 20
- 正向电流 IF
- 1.85
- 电源电压 VCC
- 500
- 工作温度 TA
- - 2
绝对最大额定值 Absolute Maximum Ratings（TA = 25°C）
超过下表数值可能造成器件永久损坏，设计时请留余量。
| Characteristic | 符号 | 额定值 | 单位 |
|---|---|---|---|
| Forward current | (Note 1) IF | 25 | mA |
| Pulse forward current | (Note 2) IFP | 50 | mA |
| IFPT | 1 | A | |
| current | (Note 3) | ||
| PD (Note 4) | 45 | mW | |
| Junction Temperature | Tj | 125 | °C |
| Output current | IO | 8 | mA |
| Peak output current | IOP | 16 | mA |
| rotceteD Output voltage | VO | - 0.5~20 | V |
| Supply voltage | VCC | - 0.5~30 | V |
| Output power dissipation | (Note 5) PO | 100 | mW |
| Junction Temperature | Tj | 125 | °C |
| Operating temperature range | Topr | - 55~100 | °C |
| Storage temperature range | Topr | - 55~125 | °C |
| Lead solder temperature (10s) | Tsol | 260 | °C |
数据来源：原厂规格书
安全与绝缘额定值（DIN EN/IEC 60747−5−5）
| standard | 型号 | TLPXXXF | 型号2 |
|---|---|---|---|
| 1 6 1:ANODE | |||
| : ±10kV/us(Min.) | @VCM=400V | 2:N.C. | |
| · Switching speed : tpHL = 0.8µs , | tpLH = 0.8µs | (Max.) | 3:CATHODE 2 5 |
| 4:EMITTER(GND) | |||
| @ IF = 16mA | ,V CC = 5V, | ||
| 5:COLLECTOR(OUTPUT) | |||
| RL = 1.9kO | ,Ta = 25°C | 3 4 SHIELD 6:VCC | |
| 7.62 mm | pich | 10.16 mm | pich |
| standard | type | TLPXXXF | type |
| Creepage Distance 7.0 mm | (Min) | 8.0 mm | (Min) |
| Clearance 7.0 mm | (Min) | 8.0 mm | (Min) 1 VCC 3 GND SHIELD 4 |
| A 0.1µF bypass capacitor must be | |||
| connected between pins 4 and 6. 1 2003-09-5 TLP719 | |||
| BVS | 5000 | Vrms | |
| (AC, 1min., R.H.= 60%) | (Note 6) | ||
| (Note 1) Derate 0.45mA / °C above 70°C. | |||
| (Note 2) 50% duty cycle, 1ms pulse width. | |||
| Derate 0.9mA / °C above 70°C. | |||
| (Note 3) Pulse width = 1µs, 300pps. | |||
| (Note 4) Derate 0.8mW / °C above 70°C. | |||
| (Note 5) Derate 1.8mW / °C above 70°C. | |||
| (Note 6) Device considered a two terminal device: Pins | 1, 2 and 3 shorted together | and | |
| pins 4, 5 and 6 shorted together. | 2 | 2003-09-5 |
电气特性 Electrical Characteristics（TA = 25°C）
| Characteristic | 符号 | 测试条件 | 最小 | 典型 | 最大 | 单位 |
|---|---|---|---|---|---|---|
| Forward voltage | VF IF | = 16mA | 1.65 | 1.85 | V | |
| ?VF / ?Ta IF | = 16mA | ? | - 2 | ? | mV / °C | |
| CT VF | = 0V , f = 1MHz | ? | 45 | ? | pF | |
| IOH (1) IF | = 0mA ,VCC = VO = 5.5V | ? | 3 | 500 | nA | |
| High level output current | IOH (2) V F | = 20V CC | ? | ? | 5 | |
| rotceteD | I | = 0mA ,V = 30V | ||||
| IOH F | C C | ? | ? | 50 | ||
| ICCH IF | = 0mA ,VCC = 30V | ? | 0.01 | 1 | µA | |
| Supply voltage | VCC ICC | = 0.01mA | 30 | ? | ? | V |
| Output voltage | VO IO | = 0.5mA | 20 | ? | ? | V |
| Current transfer ratio | IO / IF F | CC | 20 | ? | ? | % |
| Low level output voltage | VOL F | CC | ? | ? | 0.4 | V |