产品应用与封装尺寸
图纸取自原厂规格书，点击可放大查看原始尺寸标注。
引脚定义与内部结构
| 引脚 | 符号 | 名称 |
|---|---|---|
| 1 | V | |
| 2 | V | |
| 3 | FAULT | |
| 4 | V | |
| 5 | CATHODE | |
| 6 | ANODE | |
| 7 | ANODE | |
| 8 | CATHODE | |
| 9 | V | |
| 10 | V | |
| 11 | VV | |
| 12 | V | |
| 13 | V | |
| 14 | DESAT | |
| 15 | V | |
| 16 | V |
数据来源：原厂规格书引脚图
关键参数速览
- 电源电压 VCC
- 7.0
- 工作温度 TA
- 2
产品特点 Features
- The ACPL-333J is an advanced 2.5 A output current, easy- to-use, intelligent gate drivers which make IGBT V fault protection compact, aff ordable, and easy-to implement.
- lockout (UVLO), “soft” IGBT turn-off , isolated open collector fault feedback, active Miller clamping and Auto- fault reset provide maximum design fl exibility and circuit protection.
- IORM PEAK
- Block Diagram
- CCCC22
- UUVVLLOO
- 66,, 77 DD
- AANNOODDEE RR
- 55,, 88 VV
- CCAATTHHOODDEE VV OOUUTT
- LLEEDD11 EE DDEESSAATT
- DDEESSAATT
- 99,, 1122
- SSHHIIEELLDD EEEE
- 2.5 A maximum peak output current
- 2.0 A minimum peak output current
绝对最大额定值 Absolute Maximum Ratings（TA = 25°C）
超过下表数值可能造成器件永久损坏，设计时请留余量。
| 参数 | 符号 | 最小 | 最大 | 单位 | 备注 |
|---|---|---|---|---|---|
| Storage Temperature | T | -55 | 125 | °C | |
| Operating Temperature | T | -40 | 105 | °C | 2 |
| Output IC Junction | Temperature T | 125 | °C | 2 | |
| Average Input Current | I | 25 | mA | 1 | |
| Peak Transient Input Current, | I | 1.0 | A | ||
| “High” Peak Output Current | I | 2.5 | A | 3 | |
| “Low” Peak Output Current | I | 2.5 | A | 3 | |
| Positive Input Supply | Voltage V | -0.5 | 7.0 | V | |
| FAULT Output Current | I | 8.0 | mA | ||
| FAULT Pin Voltage | V FAULT | -0.5 | V CC1 | V | |
| Total Output Supply Voltage | (V - V ) | -0.5 | 33 | V | |
| Negative Output Supply | Voltage (V - V ) | -0.5 | 15 | V | 6 |
| Positive Output Supply | Voltage (V - V ) CC2 E | -0.5 | 33 - (V - V E EE | ) V | |
| Gate Drive Output Voltage | V O(PEAK) | -0.5 | V CC2 | V | |
| Peak Clamping Sinking | Current I | 1.7 | A | ||
| Miller Clamping Pin Voltage | V Clamp | -0.5 | V CC2 | V | |
| DESAT Voltage | V | V | V + 10 | V | |
| DESAT | E | E | |||
| Output IC Power Dissipation | P | 600 | mW | 2 | |
| Input IC Power Dissipation | P | 150 | mW | 2 |
数据来源：原厂规格书
安全与绝缘额定值（DIN EN/IEC 60747−5−5）
| Safety-limiting | 值 | – | maximum | 值2 | allowed | in | the | event | of | a | failure. |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Input to Output | Test | Voltage, | Method b**, | V 2306 V | |||||||
| V x 1.875=V | , | 100% | Production | Test | with t | =1 | sec, | Partial | discharge < 5 pC | ||
| Input to Output | Test | Voltage, | Method a**, | V 1968 V | |||||||
| V x 1.6=V | , Type | and | Sample | Test, t | =10 sec, | Partial | discharge | < 5 pC | |||
| Highest | Allowable | Overvoltage | (Transient | Overvoltage | t | = ini | 60 | sec) | V 8000 V IOTM peak | ||
| Case Temperature | T 175 °C | ||||||||||
| Input Current | I 400 mA | ||||||||||
| Output Power | P 1200 mW | ||||||||||
| Insulation | Resistance | at T | , V = | 500 V | R >109 Ω | ||||||
| S | IO | S | |||||||||
| Surface mount | classifi | cation | is class | A in | accordance | with | CECCOO802. | ||||
| Dependence of | Safety | Limiting | Values | on | Temperature. | (take | from | DS | AV01-0579EN | Pg.7) |
订货信息与供货形式
| 型号 | 型号2 | RoHS | Compliant | 封装 | Mount | Tape& | 包装 | 60747-5-5 | 数量 |
|---|---|---|---|---|---|---|---|---|---|
| ACPL-333J | is UL | Recognized | with 5000 | Vrms for 1 minute | per UL1577. | ||||
| Part | number | RoHS | Compliant | Package | Mount | Tape& | Reel | 60747-5-5 | Quantity |
| column | to form | an order | entry. | ||||||
| RoHS | compliant | option will | use ‘-XXXE‘. |