产品应用与封装尺寸
图纸取自原厂规格书，点击可放大查看原始尺寸标注。
引脚定义与内部结构
| 引脚 | 符号 | 名称 |
|---|---|---|
| 1 | NC | |
| 2 | CATHODE | |
| 3 | D | |
| 4 | I | |
| 5 | V | |
| 6 | V | |
| 7 | FAULT | |
| 8 | V | |
| 9 | E | |
| 10 | NC | |
| 11 | V | |
| 12 | V | |
| 13 | V | |
| 14 | V | |
| 15 | V | |
| 16 | V | |
| 17 | V |
数据来源：原厂规格书引脚图
关键参数速览
- 正向电压 VF
- 1.95
- 电源电压 VCC
- voltage (VCC2
- 工作温度 TA
- 105
产品特点 Features
- Dual output drive for external NMOS and PMOS buffer
- 1.0 A minimum peak output current
- MOSFET buffer
- IGBT desaturation detection
- Isolated DESAT and UVLO fault feedback
- Configurable “Soft” shutdown during fault
- Under Voltage Lock-Out Protection (UVLO) with
- Hysteresis for positive and negative power supply
- OUTN source of IGBT/MOSFET protection. DESAT will remain until V - V is decreased below V or V - V is
- CC2 E UVLOP- E EE
- UVLON- constant IGBT/MOSFET protection.
- I UVLO_P and UVLO_N DESAT Function
- X Active Not Active
- ON Not Active Active (with DESAT fault)
- ON Not Active Active (no DESAT fault)
- OFF Not Active Not Active
绝对最大额定值 Absolute Maximum Ratings（TA = 25°C）
超过下表数值可能造成器件永久损坏，设计时请留余量。
| 参数 | 符号 | 最小 | 最大 | 单位 | 备注 |
|---|---|---|---|---|---|
| Storage Temperature | T | -55 | 125 | °C | |
| Operating Temperature | T | -40 | 105 | °C | |
| Output IC Junction Temperature | T | 125 | °C | ||
| Average Input Current | I | 25 | mA | 1 | |
| Peak Transient Input Current | I | 1.0 | A | ||
| “High” Peak Output Current | I | 5.5 | A | 2 | |
| “Low” Peak Output Current | I | 5.5 | A | 2 | |
| Positive Input Supply Voltage | V | 0 | 7 | V | |
| FAULT Output Current | I | 8 | mA | ||
| FAULT Pin Voltage | V FAULT | -0.5 | V CC1 | V | |
| Total Output Supply Voltage | (V – V ) | 0 | 35 | V | |
| Negative Output Supply Voltage | (V – V ) | 0 | 17 | V | |
| Positive Output Supply Voltage | (V – V ) | 0 | 35 – (V – V | ) V | |
| CC2 E | E | EE | |||
| Input Current (Rise/Fall Time) | t /t | 500 | ns | ||
| High Side Output Voltage | V | V – 0.5 | V + 0.5 | V | |
| OUTP(PEAK) | E | CC2 | |||
| Low Side Output Voltage | V | V – 0.5 | V + 0.5 | V | |
| OUTN(PEAK) | EE | E | |||
| DESAT Voltage | V | V – 0.5 | V + 0.5 | V | |
| DESAT | E | CC2 | |||
| V Voltage | V | V – 0.5 | V + 0.5 | V | |
| GMOS | GMOS | EE | E | ||
| Output IC Power Dissipation | P | 600 | mW | 3 | |
| Input LED Power Dissipation | P | 150 | mW | 4 |
数据来源：原厂规格书
安全与绝缘额定值（DIN EN/IEC 60747−5−5）
| 型号 | 型号2 |
|---|---|
| Approval under UL 1577, component recognition | program up to V = 5000 V . File E55361. |
| Approval under CSA Component Acceptance | Notice #5, File CA 88324. |
电气特性 Electrical Characteristics（TA = 25°C）
| 参数 | 符号 | 最小 | 典型 | 最大 | 单位 | 测试条件 | 图号 | 备注 |
|---|---|---|---|---|---|---|---|---|
| Unless otherwise | noted, all typical | values | at T = 25° | C, V = 3.3 | V or 5 V, V | – V = 15 V, V – | V = 8 V; all | Minimum/ |
| A | CC1 | CC2 E E | EE | |||||
| Maximum | specifications are at | Recommended | Operating | Conditions. | ||||
| V High Level | I | -1 | A | V – V ≤ 15 V | 3 | 1 | ||
| OUTP | OUTPH | CC2 OUTP | ||||||
| V Low Level | I | 1 | A | V – V ≤ 15 V | 4 | 1 | ||
| OUTP | OUTPL | OUTP E | ||||||
| V High Level | I | -1 | A | V – V ≤ 8 V | 3 | 1 | ||
| OUTN | OUTNH | E OUTN | ||||||
| V Low Level | I | 1 | A | V - V ≤ 8 V | 4 | 1 | ||
| OUTN | OUTNL | OUTN EE | ||||||
| V High Level | R | 3.5 | 7 | Ω | I = -1 A, V = 0 V | 3, 5 | 1 | |
| OUTP | OUTPH | OUTP F | ||||||
| V Low Level | R | 1.5 | 4 | Ω | I = 1 A, I = 8 mA | 4, 6 | 1 | |
| OUTP | OUTPL | OUTP F | ||||||
| V High Level | R | 3.5 | 7 | Ω | I = -1 A, V = 0 V | 3, 5 | 1 | |
| OUTN | OUTNH | OUTN F | ||||||
| V Low Level | R | 1.5 | 4 | Ω | I = 1 A, I = 8 mA | 4, 6 | 1 | |
| OUTN | OUTNL | OUTN F | ||||||
| V High Level | V | V – | 0.60 V – | 0.30 | V | I = -100 mA, V | = 0 V 1 | 2, 4, 5 |
| OUTP | OUTPH | CC2 | CC2 | OUTP F | ||||
| V Low Level | V | V + 0.14 | V + 0.50 | V | I = 100 mA, I = | 8 mA 2 | ||
| OUTP | OUTPL | E | E | OUTP F | ||||
| V High Level | V | V – 0.60 | V – 0.30 | V | I = -100 mA, V | = 0 V 1 | 3, 4, 5 | |
| OUTN | OUTNH | E | E | OUTN F | ||||
| V Low Level | V | V + 0.12 | V + 0.60 | V | I = 100 mA, I = | 8 mA 2 | ||
| OUTN | OUTNL | EE | EE | OUTN F | ||||
| V High Level | I | -80 | mA | V – V ≤ 8 V, I = | 8 mA, | |||
| GMOS | OUTGH | E GMOS F | ||||||
| Output Current | DESAT = Open | |||||||
| V Low Level | I | 80 | mA | V – V ≤ 8 V, V | = 0 V, | |||
| GMOS | OUTGL | GMOS EE F | ||||||
| Output Current | DESAT = Open | |||||||
| V High Level | R | 22 | 30 | Ω | I = -80 mA, I = | 8 mA 7 | ||
| GMOS | OUTGH | OUTG F | ||||||
| V Low Level | R | 6 | 10 | Ω | I = 80 mA, V = | 0 V, 8 | ||
| GMOS | OUTGL | OUTN F | ||||||
| Output R | DESAT = Open | |||||||
| V High Level | V | V | V | I = 0 mA, I = 8 | mA, | |||
| GMOS | OUTGH | E | OUTG F | |||||
| Output Voltage | DESAT = Open | |||||||
| V Low Level | V | V | V | I = 0 mA, V = 0 | V, | |||
| GMOS | OUTGL | EE | OUTN F | |||||
| Output Voltage | DESAT = Open | |||||||
| High Level Output | I CC2H | 8.5 | 12 | mA | V = 0 V, No Load F | 9, 10 | ||
| Low Level Output | I CC2L | 8.5 | 12 | mA | I = 8 mA, No Load, F | 9, 10 | ||
| High Level Output | I | 8 | 11 | mA | V = 0 V, No Load | 11, 12 | ||
| Low Level Output | I | 8 | 11 | mA | I = 8 mA, No Load | 11, 12 | ||
| Threshold Input | I | 1.3 | 5 | mA | No Load, V – V | < 5 V, 13, 14 | ||
| Current Low to | High | V – V < 1 V | ||||||
| Threshold Input | V | 0.8 | V | No Load, V – V | > 5 V, | |||
| Voltage High to | Low | V – V > 1 V | ||||||
| Unless otherwise | noted, all typical | values | at T = 25° | C, V = 3.3 | V or 5 V, V | – V = 15 V, V – | V = 8 V; all | Minimum/ |
| A | CC1 | CC2 E E | EE | |||||
| Maximum | specifications are at | Recommended | Operating | Conditions. | ||||
| Input Forward | Voltage V | 1.2 | 1.55 | 1.95 | V | I = 8 mA | ||
| Temperature | ΔV /ΔT | -1.7 | mV/°C | I = 8 mA | ||||
| Input Capacitance | C | 70 | pF | f = 1 MHz, V = 0 V | ||||
| UVLO_P Threshold, | V | 12 | 13 | 14 | V | I = 8 mA, V – V | < 5 V 31 | 2, 5, 6 |
| UVLOP+ | F OUTP | E | ||||||
| V | 11 | 12 | 13 | V | I = 8 mA, V – V | > 5 V 31 | 3, 5, 7 | |
| UVLOP- | F OUTP | E | ||||||
| UVLO_P Hysteresis, | V | 1 | V | |||||
| UVLO_N Threshold, | V | 4.8 | 5.4 | 6 | V | I = 8 mA, V – V | < 1 V 31 | 2, 5, 8 |
| UVLON+ | F OUTN | EE | ||||||
| E EE | V | 4.7 | 5 | 5.7 | V | I = 8 mA, V – V | > 1 V 31 | 3, 5, 9 |
| UVLON- | F OUTN | EE | ||||||
| UVLO_N Hysteresis, | V | 0.3 | V | |||||
| DESAT Threshold | V | 7.5 | 8 | 9 | V | V – V > V | 15 | 5 |
| DESAT | CC2 E UVLOP- | |||||||
| Blanking Capacitor | I | 0.15 | 0.25 | 0.36 | mA | V = 2 V | 16 | 5, 10 |
| DESAT Low Voltage | V | 1.1 | 3 | V | I =10 mA | 5, 10 | ||
| FAULT Logic Low | V | 0.10 | 0.25 | V | V = 0 V, R = 10 | kΩ, | ||
| FAULTL | DESAT F | |||||||
| Output Voltage | C = 1 nF, V = 5 V F CC1 | or 3.3 V | ||||||
| FAULT Logic High | V | V | V | DESAT = Open, R = | 10 kΩ, | |||
| FAULTH | CC1 | F | ||||||
| Output Voltage | C = 1 nF, V = 5 V F CC1 | or 3.3 V | ||||||
| FAULT Logic Low | I | 0.25 | mA | V = 0.15 V, V | = 5 V | |||
| FAULTL | FAULT CC1 | |||||||
| Output Current | or 3.3 V | |||||||
| FAULT Logic High | I | 0.2 | 1 | µA | V = V = 5 V | or 3.3 V | ||
| FAULTH | FAULT CC1 | |||||||
| 1. Output is sourced | at -1.0 A / 1.0 A | with a maximum | pulse width | = 10 µs. | ||||
| E | EE | UVLON+ | ||||||
| CC2 | E UVLOP+ | E EE | ||||||
| ACPL-339J work | in conjunction to | ensure constant | IGBT protection. | |||||
| Input-Output Momentary | V | 5000 | V | RH < 50%, | 1, 2 |