Name: AVAGO ACPL-T350-000E
Brand: AVAGO
Availability: InStock

产品实拍图

本型号暂无已核对的专属实拍图。为避免图文不符，本页不放同系列近似图；如需实物照片，请联系销售获取本批次实拍。

产品应用与封装尺寸

图纸取自原厂规格书，点击可放大查看原始尺寸标注。

数据来源：原厂规格书引脚图

The ACPL-T350 contains a GaAsP LED. The LED is optically • 2.5A Absolute Maximum Peak Output Current coupled to an integrated circuit with a power output
15 kV/µs minimum Common Mode Rejection (CMR) at stage. These optocouplers are ideally suited for driving
V = 1500 V power IGBTs and MOSFETs used in motor control inverter
1.5 V maximum low level output voltage (V )

超过下表数值可能造成器件永久损坏，设计时请留余量。

参数	符号	最小	最大	单位	备注
Storage Temperature	T	-55	125	°C
Operating Temperature	T	-40	100	°C
Average Input Current	I		25	mA	1
Peak Transient Input Current	I		1.0	A
“High” Peak Output Current	I		2.5	A	2
“Low” Peak Output Current	I		2.5	A	2
Supply Voltage	V – V	0	35	V
Input Current (Rise/Fall	Time) t /t		500	ns
Output Voltage	V	0	V	V
Output Power Dissipation	P		250	mW	3
Total Power Dissipation	P		295	mW	4
Lead Solder Temperature	260°C for 10	sec., 1.6 mm below	seating plane

数据来源：原厂规格书

说明	符号	包装	060	单位
		ACPL-T350
Installation classification per DIN VDE 0110/39,	Table 1
for rated mains voltage ≤ 150 V		I – IV
for rated mains voltage ≤ 300 V		I – IV
for rated mains voltage ≤ 450 V		I – III
Pollution Degree (DIN VDE 0110/39)		2
Input to Output Test Voltage, Method b*	V	1181		V
V x 1.875=V , 100% Production Test with	t =1 sec, Partial discharge < 5 pC
Input to Output Test Voltage, Method a*	V	1008		V
V x 1.6=V , Type and Sample Test, t =10	sec, Partial discharge < 5 pC
Highest Allowable Overvoltage (Transient	Overvoltage t = 60 sec) V ini IOTM	6000		V peak
Case Temperature	T	175		°C
Input Current	I	230		mA
Output Power	P	600		mW
Insulation Resistance at T , V = 500 V	R	>109		W
			ACPL-T350	Option 060
detailed description of Method a and Method b partial	discharge test profiles.
Surface mount classification is Class A in accordance	with CECC 00802. 600 - 400
	0	25 50	75 100	125 150 175
		T - CASE	TEMPERATURE	- °C
Gap (Clearance)	through air.
Tracking (Creepage)	path along body.
Minimum Internal 0.08	mm Through insulation distance conductor	to	conductor,	usually the
Plastic Gap	straight line distance thickness between	the	emitter	and detector.
Tracking Resistance CTI > 175	V DIN IEC 112/VDE 0303 Part 1
Isolation Group IIIa	Material Group (DIN VDE 0110, 1/89,	Table 1)

参数	符号	最小	典型	最大	单位	测试条件	图号	备注
		A		F(ON)		F(OFF)	CC
EE				A	CC	EE
High Level Output	Current I OH	0.5	1.6		A	V = V – 4 V O CC	2, 3, 15	5
		2.0			A	V = V – 15 V		2
Low Level Output Current	I OL	0.5	1.6		A	V = V + 2.5 V O EE	5, 6, 16	5
		2.0			A	V = V + 15 V		2
High Level Output Voltage	V	V -4	V -3		V	I = -100 mA	1, 3, 17	6, 7
	OH	CC	CC			O
Low Level Output Voltage	V		V +0.5	1.5	V	I = 100 mA	4, 6, 18
	OL		EE			O
High Level Supply Current	I		2.0	4.0	mA	Output open,	7, 8
						I = 7 to 16 mA
Low Level Supply Current	I		2.0	4.0	mA	Output open,
						V = -3.0 to +0.8	V
Threshold Input Current	I FLH		2.0	5	mA	I = 0 mA, V > O O	5 V 9, 19
Threshold Input Voltage	V FHL	0.8			V	I = 0 mA, V > O O	5 V
Input Forward Voltage	V	1.2	1.5	1.8	V	I = 10 mA
Temperature Coefficient	DV /DT		-2.0		mV/°C	I = 10 mA
Input Capacitance	C		60		pF	f = 1 MHz, V = 0	V
UVLO Threshold	V UVLO+	11.0	12.3	13.5	V	I = 10 mA, V > F O	5 V 14, 20
	V UVLO–	9.5	10.7	12.0	V	I = 10 mA, V > F O	5 V
UVLO Hysteresis	UVLO HYS		1.6		V	I = 10 mA, V > F O	5 V
Input-Output Momentary	Withstand V	3750			Vrms	RH < 50%,		14, 15
Voltage**						t = 1 min., T = 25°C
Resistance Input-Output)	R		1012		W	V = 500 V		15
Capacitance Input-Output)	C		0.6		pF	Freq=1 MHz
LED-to-Case Thermal	Resistance q		467		°C/W	Thermocouple	located
						at center underside	of
LED-to-Detector Thermal	Resistance q		442		°C/W
Detector-to-Case Thermal	Resistance q		126		°C/W
1. Derate linearly above 70°C	free-air temperature at a rate	of 0.3 mA	/°C.
3. Derate linearly above 70° C	free-air temperature at a rate	of 4.8	mW /°C.
9. Pulse Width Distortion (PWD)	is defined as \|tPHL - tPLH\|	for any given	device.

型号	型号2	Compliant	封装	Surface	Mount	Gull	Wing	Tape&	包装	60747-5-5	数量
ACPL-T350	is UL	Recognized	with 3750 Vrms	for 1	minute per	UL1577.
Part	number	Compliant	Package	Surface	Mount	Gull	Wing	Tape&	Reel	60747-5-5	Quantity
RoHS	compliant	option will use	‘-XXXE‘.
The	ACPL-T350	is approved by	the following	organizations:
Approval	under:					Approval	under	UL	1577,	component	recognition
DIN	EN 60747-5-5	(VDE	0884-5):2011-11			program,	File	E55361.

Wide operating V range: 15 to 30 VoltsANODE 2 7 VOIGBT/MOSFET gate driveIndustrial InvertersN/C 4 5 VEESHIELDSwitching Power Supplies (SPS) and VEE.

规格书为原厂公开资料，点击在新窗口打开下载。

常备现货、免费送样、支持小批量试产。报出用量与封装要求，当天给报价与交期。