产品实拍图
本页为博科信现货实拍（器件丝印 见规格书）。图片已加防盗水印，需要最新批次照片或未加水印原图请联系销售；点击图片可放大。
产品应用与封装尺寸
图纸取自原厂规格书，点击可放大查看原始尺寸标注。
引脚定义与内部结构
| 引脚 | 符号 | 名称 |
|---|---|---|
| 3 | SHIELD | |
| 4 | SHIELD | |
| 5 | GND | |
| 6 | VO | |
| 7 | VE | |
| 8 | VCC |
数据来源：原厂规格书引脚图
关键参数速览
- 正向电流 IF
- 15.0
- 电源电压 VCC
- 7
- 工作温度 TA
- 85
产品特点 Features
- 15 kV/μs at 3.3V.
- µ 3.3V/5V Dual Supply Voltages
- µ Low power consumption
- µ 15 kV/μs minimum Common Mode Rejection (CMR) at
- V = 1000 V
- µ High speed: 15 MBd typical
- µ LVTTL/LVCMOS compatible
- µ Low input current capability: 5 mA
- µ Guaranteed AC and DC performance over tempera- ture: –40kΩC to +85kΩC
- µ Available in 8-pin DIP, SOIC-8
- µ Strobable output (single channel products only)
- Schematic
- HCPL-260L/060L HCPL-263L/063L
- ICC ICC
- VCC VCC
- 2+ 8 8
绝对最大额定值 Absolute Maximum Ratings（TA = 25°C）
超过下表数值可能造成器件永久损坏，设计时请留余量。
| 参数 | 符号 | Package** | 最小 | 最大 | 单位 | 备注 |
|---|---|---|---|---|---|---|
| Storage Temperature | T | –55 | 125 | ˚C | ||
| Operating Temperature† | T | –40 | 85 | ˚C | ||
| Average Forward Input | Current I | Single 8-Pin DIP | 20 | mA | 2 | |
| Dual 8-Pin DIP | 15 | 1, 3 | ||||
| Input Power Dissipation | P | 40 | mW | |||
| Supply Voltage (1 Minute | Maximum) V | 7 | V | |||
| Enable Input Voltage (Not | to Exceed V | Single 8-Pin DIP | V + 0.5 | V | ||
| Enable Input Current | I | 5 | mA | |||
| Output Collector Current | I | 50 | mA | 1 | ||
| Output Collector Voltage | V | 7 | V | 1 | ||
| Output Collector Power | Dissipation P | Single 8-Pin DIP | 85 | mW | ||
| Dual 8-Pin DIP | 60 | 1, 4 | ||||
| Lead Solder Temperature | T | 8-Pin DIP | 260˚C for | 10 sec., 1.6 | mm below | |
| (Through Hole Parts Only) | seating | plane |
数据来源：原厂规格书
安全与绝缘额定值（DIN EN/IEC 60747−5−5）
| 参数 | 符号 | 值 | 值2 | 单位 | 条件 |
|---|---|---|---|---|---|
| 8-Pin DIP | |||||
| (300 Mil) | SO-8 | ||||
| Minimum External Air | L (101) | 7.1 | 4.9 | mm | Measured from input terminals to output |
| Gap (External Clearance) | terminals, shortest distance through air. | ||||
| Minimum External | Tracking L (102) | 7.4 | 4.8 | mm | Measured from input terminals to output |
| (External Creepage) | terminals, shortest distance path along body. | ||||
| Gap (Internal Clearance) | to conductor, usually the direct distance | ||||
| Tracking Resistance | CTI | 200 | 200 | Volts | DIN IEC 112/VDE 0303 Part 1 |
| Isolation Group | IIIa | IIIa | Material Group (DIN VDE 0110, 1/89, Table 1) |
电气特性 Electrical Characteristics（TA = 25°C）
| 参数 | 符号 | 器件 | 最小 | 典型 | 最大 | 单位 | 测试条件 | 图号 | 备注 |
|---|---|---|---|---|---|---|---|---|---|
| High Level | I * OH | 4.5 | 50 | μA | V = 3.3 V, V = 2.0 CC E | V, 1 | 1, 15 | ||
| Output Current | V = 3.3 V, I = 250 μA | ||||||||
| Input Threshold | I TH | 3.0 | 5.0 | mA | V = 3.3 V, V = 2.0 CC E | V, 2 | 15 | ||
| Current | V = 0.6 V, | ||||||||
| I (Sinking) = 13 mA | |||||||||
| Low Level | V * OL | 0.35 | 0.6 | V | V = 3.3 V, V = 2.0 CC E | V, 3 | 15 | ||
| Output Voltage | I = 5 mA, | ||||||||
| I (Sinking) = 13 mA | |||||||||
| High Level | I CCH | Single | 4.7 | 7.0 | mA | V = 0.5 V I = 0 mA E F | |||
| Supply Current | Dual | 6.9 | 10.0 | V = 3.3 V | |||||
| Low Level | I CCL | Single | 7.0 | 10.0 | mA | V = 0.5 V I = 10 mA E F | |||
| Supply Current | Dual | 8.7 | 15.0 | V = 3.3 V | |||||
| High Level | I EH | Single | –0.5 | –1.2 | mA | V = 3.3 V, V = 2.0 V CC E | |||
| Low Level | I * EL | Single | –0.5 | –1.2 | mA | V = 3.3 V, V = 0.5 V CC E | |||
| High Level | V | Single | 2.0 | V | 15 | ||||
| Low Level | V | Single | 0.8 | V | |||||
| Input Forward | V F | 1.4 | 1.5 | 1.75* | V | T = 25˚C, I = 10 mA A F | 5 | 1 | |
| Input Diode | ∆V / | –1.6 | mV˚C | I = 10 mA | 1 | ||||
| Input | C | 60 | pF | f = 1 MHz, V = 0 V | 1 | ||||
| High Level Output | I | 5.5 | 100 | A | V = 5.5 V, | 1 | 1,15 | ||
| Current | V = 5.5 V, I = 250 A | ||||||||
| Input Threshold | I TH | Single | 2.0 | 5.0 | mA | V = 5.5 V, V = 0.6 CC O | V, 2 | 15 | |
| Current | I > 13 mA | ||||||||
| Dual | 2.5 | OL | |||||||
| Low Level Output | V OL | 0.35 | 0.6 | V | V = 5.5 V, I = 5 CC F | mA, 3 | 15 | ||
| Voltage | I (Sinking) = 13 mA | ||||||||
| High Level Supply | I CCH | Single | 7.0 | 10.0 | mA | V =0.5V, V = 5.5 E CC | V, | ||
| Current | I = 0 mA | ||||||||
| 6.5 | mA | V =V , V = 5.5 V, I = 0 mA | |||||||
| Dual | 10.0 | 15.0 | V = 5.5 V, IF = 0 | mA | |||||
| Low Level Supply | I CCL | Single | 9.0 | 13.0 | mA | V =0.5V, V = 5.5 E CC | V, | ||
| Current | I = 0 mA | ||||||||
| 8.5 | mA | V =V , Vv = 5.5 V, IF = 0 mA | |||||||
| Dual | 13.0 | 21.0 | mA | V = 5.5 V, I = 0 | mA | ||||
| High Level Enable | I EH | Single | -0.7 | -1.6 | mA | V = 5.5 V, V = 2.0V CC E | |||
| Low Level Enable | I EL | Single | -0.9 | -1.6 | mA | V = 5.5 V, V = 0.5V CC E | |||
| High Level Enable | V | Single | 2.0 | V | 15 | ||||
| Low Level Enable | V | Single | 0.8 | V | |||||
| Input Forward | V F | 1.4 | 1.5 | 1.75 | V | T = 25 °C, I = 10 A F | mA | 5 | |
| 1.3 | 1.8 | V | IF=10mA | ||||||
| Input Diode | ΔV /ΔT | -1.6 | mV/°C | I = 10 mA | 1 | ||||
| Input Capacitance | C | 60 | pF | f = 1 MHz, V = 0 V | 1 | ||||
| Input-Output | I * | Single 8-Pin | DIP | 1 | μA | 45% RH, t = 5 s, | 16, 17 |
相关 / 可替代型号
6N137-500EHCNW137-500EHCPL-0600-500EHCPL-0601-500EHCPL-0611-500EHCPL-0630-500EHCPL-0631-500EHCPL-2631-500E
以上型号来自规格书与型号命名比对，参数需以各自规格书为准；下单前请与销售确认封装与脚位。
订货信息与供货形式
| 型号 | 型号2 | Compliant | Compliant2 | 封装 | Mount | Wing | & | 包装 | Minute |
|---|---|---|---|---|---|---|---|---|---|
| HCPL-xxxx | is | UL Recognized | with | 3750 Vrms | for 1 minute | per | UL1577 | ||
| Part | number | Compliant | Compliant | Package | Mount | Wing | & | Reel | Minute |
| column | to form | an order | entry. | Combination | of Option | 020 and | Option | 060 | is |
| Option | datasheets | are | available. | Contact your | Avago | sales | representative | or | |
| RoHS | compliant | option | will use ‘-XXXE‘. |